Air Conditioning Installation Provo UT is essential to your home comfort. It is not a process to be taken lightly, as shortcuts can result in inefficient operation or voided warranties.
A well-designed and properly installed AC system can last for years to come. Ensure your contractor follows these steps during the installation of your new system:
When you hire a professional, you can trust that the installation process is handled by an experienced team of specialists. They are trained to work with all brands and types of air conditioning systems, including those that require complex wiring, and can provide comprehensive maintenance plans and warranties.
The process begins with an in-home visit by a knowledgeable technician, who can inform you about the different options for your home. This information can help you select a unit that best meets your needs and budget.
If you have an existing system, the technician will review that as well to ensure the new AC is properly sized. If the air conditioner is too small, it will short cycle, causing costly energy waste. An improperly sized unit can also cause the system to wear out faster, leading to expensive repairs.
Next, the technician sets up the outdoor air conditioner on the composite pad they prepared earlier. They will inspect it for damage that may have occurred during transport, and make sure the unit is positioned correctly on the pad. Then, they will connect the line set that was installed in the previous step to the service valve on the air conditioner and use a special tool to melt the copper lines together, forming a leak-free connection.
Affixing the piping to the wall is the next step. A good installer will use clamps to secure the piping, and then spray expanding polyurethane foam into the holes they drilled to feed the piping through. The foam will seal the hole, preventing hot air or insects from entering.
When the piping is secure, they can mount the indoor unit to the wall. This is a job for a skilled, qualified installer who can accurately read and follow instructions, especially when mounting the unit to a stud-wall with no obstructions. This is because the studs must be located precisely, and the wall must be perfectly square.
A good installer will also ensure the new unit is positioned at least 3.3 feet away from antennas and power or connecting lines used for television, radio, security systems, intercoms, telephones, or lights. This is because these sources can create electrical noise that interferes with the operation of an air conditioner.
Electrical Connections
Electrical connections are essential to the operation of your air conditioning system. They carry electrical signals and power to the various components of your AC unit, ensuring that it works correctly and safely. Proper wiring can prevent issues like overloads and short circuits, which may cause fire hazards or reduce your AC’s performance.
During an AC installation, an electrician can make all of the necessary electrical connections, including installing new outlets or tapping into existing ones. They can also evaluate the electrical capacity of your home or business and recommend an upgrade if needed. This can include upgrading your service panel to handle the increased energy needs of your new AC unit, or creating a dedicated circuit for it.
The electrical requirements of an air conditioner are based on its wattage and voltage, which can be measured by an electrician. Manufacturers generally suggest that the air conditioner be connected to a dedicated circuit that feeds directly from your service panel. This ensures a steady supply of electricity and prevents tripping breakers due to overloading.
In addition, the breaker must be large enough to handle your air conditioner’s electricity needs. If your breaker trips frequently, it may be too small and require an upgrade. Additionally, your breaker may be wearing out, which can lead to overheating and fire hazards.
The wires that connect the breaker to the rest of your system can also become worn or frayed over time, which can damage the connections and affect the delivery of electricity. An experienced electrician can inspect the connections and replace any that are damaged or faulty. It is important to remember that any time you work on your AC’s electrical system, you should turn off the power at the breaker box and use a voltage tester to ensure no electricity is flowing before touching any of the components. This will prevent serious accidents and injuries. In addition, you should always avoid working on any electrical equipment if your hands are wet or you have wet tools. It is also a good idea to have an experienced electrician perform all of your electrical work.
Ductwork Evaluation
Your home has a system of tubes called ducts that serve as the roads for air to travel from your air conditioning system to different rooms in your house. A ductwork evaluation is like an inspection of these tubes to make sure they are functioning properly. A professional technician will look at the design and efficiency of your ductwork to find out if it is affecting your home’s comfort.
A major problem with ducts is that they can leak conditioned air. When this happens, you can lose up to 20 percent of your conditioned air. This can cause many negative problems.
Some signs of leaking ducts include unexplained high energy bills, hot or cold spots in the home, and allergy symptoms. Leaking ducts allow contaminated outside air to enter the home, which may cause or worsen allergy and asthma symptoms in family members.
During a ductwork evaluation, a technician will check to see how tightly the ducts are sealed and whether there is any debris or obstructions blocking the flow of air. The technician will also evaluate the duct insulation and ensure it is not deteriorating or in need of replacement.
If your ducts are not sealing well, it is important to have them fixed as soon as possible. This will not only help your comfort, but it will save you money on your energy bill. Leaky ducts are not only costly to operate, they can lead to premature wear and tear on your equipment.
There are many factors that can affect the condition of your ductwork, including water damage, mold or mildew, and fire or smoke damage. Air filters may also be damaged or clogged, and contaminants such as dust, pet dander, and dead skin cells can build up in the ducts over time.
Your HVAC expert will use specialized equipment to locate leaks in the ductwork and seal them. They will also measure the ductwork’s capacity (CFM) and evaluate it for zoning, which allows a building to be divided into different temperature zones for individual control of heating and cooling.
Modifications or Repairs
An air conditioning installation is a large project that requires the expertise of trained professionals. It is possible that during the course of the installation there may be repairs or modifications that need to be made. If this is the case, it is important to have a qualified technician handle these modifications to ensure that the air conditioner runs properly and efficiently. Some of the most common problems caused by improperly installed air conditioners include leaky ductwork, electrical issues due to incorrect wiring connections and insufficient insulation or sealing around ductwork. Having these issues repaired can help to prevent problems such as mold growth, poor airflow and higher energy bills.
Before the new air conditioner is installed, the technicians will first use a recovery machine to remove any existing refrigerant from the system. This will be drained into a tank and then recycled to the new air conditioner. This will allow the technicians to form a proper line set, which is the copper lines through which the refrigerant travels from the outdoor condenser unit to the indoor evaporator coil on top of your furnace. During the process, the installers will also install hangers to secure the line set and run them close to beams and ductwork where possible to avoid having them be too exposed.
Next, the installers will prepare the area where the outside unit is to be placed by removing the old air conditioner & any ductwork that is connected to it. Then the contractors will install the new unit according to the manufacturer’s instructions. This will include securing it to the ground using a pad, which is often made of composite material that can absorb vibration and last as long as the unit itself. The existing concrete pad that the air conditioner was sitting on will be replaced with a new one, which should also be made of composite material so that it can withstand the vibrations that are produced when the air conditioning system is running.
The final step in the installation process is to connect the new air conditioner to the existing service valve on the outdoor unit. This will allow the technicians to easily disconnect and reconnect the air conditioner if it ever needs repair or maintenance in the future.